Picks for Dogs Get to know your dog. Find what works for you.
Category illustration · not a product photo
Pressure-mounted dog gates / Sources checked 2026-10-17

Richell 94930

Details shown for: Richell 94930.

Sources includedNo hands-on testing

Where to find this product

Check listing at Richell

Check your chosen size, color, pack quantity and included parts at the store.

Check delivery to your address · Listing checked 2026-10-20

Direct links earn no commission. Before you order, check the price, stock, shipping and selected size or version at the store.

Compare product

A closer look.

Use these details to decide what’s worth a closer look. They apply to the size and version shown; check the notes before choosing yours.

appropriate dog mass, interval
8.8–88 lbExcludes outside interval; not a push-load ratingSource 1Source 2
spindle spacing and door width, tuple
1.5 in; 20.1 inDoes not establish head clearance or handler accessSource
materials, set
natural-wood door; steel frameManual also names plywood without component allocationSource
exact 2.4-in support-face eligibility, boolean
Unknownprose says wider than 2.4 in; figure text says 2.4 and above. Diagram pixels unavailable; exact boundary not resolvedSource

Before you choose.

These listed details don’t prove a product will fit your dog, work as claimed or be safe for your intended use. Check anything marked unknown or conflicting before relying on it.

Try this before you buy

Measure the opening and check the mounting surface. Match any parts to the exact model and follow its installation instructions.

Sources and research scope

Research scope: Richell 94930.

  1. PMG02 · appropriate dog mass, interval

    manufacturer use restriction · Inspected

    [S584] General Information; [S585] p.1

    Excludes outside interval; not a push-load rating

    S584 · richellusa.comS585 · richellusa.com
  2. PMG03 · spindle spacing and door width, tuple

    manufacturer specification · Inspected

    [S584] General Information

    Does not establish head clearance or handler access

    S584 · richellusa.com
  3. PMG04 · materials, set

    manufacturer specification · Inspected

    [S584] General Information

    Manual also names plywood without component allocation

    S584 · richellusa.com
  4. PMG06 · exact 2.4-in support-face eligibility, boolean

    source boundary conflict · Inspected

    [S585] pp.2–3

    Diagram pixels unavailable; exact boundary not resolved

    S585 · richellusa.com
About the evidence

These details apply to the model and size shown, on the date listed. Claims from makers and shops haven’t been independently tested here. If a detail is missing or sources disagree, you’ll see that beside it. Illustrations show the category, not the named product.